Hardware List from RS:
Raspberry Pi 3 Model B SBC
Heatsink BGA 12x12 27K/W black
Official Pi 3 Power Supply Black
Official Pi 3 Black/Grey Case
Accessories:
MicroSDHC Card (with Adapter) 32G Class 10
USB SSD Harddisk 240G
USB Keyboard and Mouse
SD Card images for multiboot
1.
NOOBS(easy to install but hard to reconfigure or add custom image for multiboot)
#Download NOOBS using Mac Terminal and write to MicroSDHC Card (with Adapter and mounted in Mac)
cd ~/Downloads
wget http://vx2-downloads.raspberrypi.org/NOOBS/images/NOOBS-2016-02-29/NOOBS_v1_8_0.zip
unzip NOOBS_v1_8_0.zip -d /Volumes/NO\ NAME/
#insert the SD card and power on the machine
#after boot into NOOBS and choose install Rasbian and OSMC (that is kodi)
#Rasbian username and password are pi and raspberry respectively
#OSMC username and password are all osmc
2. BerryBoot(very flexible and allow to add custom image for multiboot)
wget http://downloads.sourceforge.net/project/berryboot/berryboot-20160313-pi2-pi3.zip
# for reformat SD Card to FAT32 and label BERRYBOOT
# sudo diskutil eraseDisk FAT32 BERRYBOOT MBRFormat /dev/disk4
unzip berryboot-20160313-pi2-pi3.zip -d /Volumes/BERRYBOOT/
#insert the SD card and power on the machine
#after boot into BerryBoot and choose install Debian Rasbian, OpenELEC (that is kodi) or others
#OpenELEC username and password are root and openelec respectively.
#hold down mouse button on AddOS button of BerryBoot Menu and choose Copy OS from USB stick
#To install Ubuntu-trusty image for berryboot downloaded here below
https://mega.nz/#!PwYl1QBJ!Fu7A87qrAL4jTmv0RhlnksprhVCm4gsHi1xhQBELJGk
# login to Ubuntu-trusty, username and password are all ubuntu
#BerryBoot additional images are here below and can be downloaded in USB drive for offline installation
https://sourceforge.net/projects/berryboot/files/os_images/
It is possible to shrink the Linux partition of berryboot in order to create a third partition for the dphys-swapfile with about 2G size. The SD card for berryboot should be mounted as USB and Use
sudo umount /dev/sda2; sudo e2fsck -f /dev/sda2; sudo resize2fs /dev/sda2 27G;
to check and shrink and use
sudo fdisk /dev/sda; to delete the second partition, recreate the second partition with +27G and then create the third partition with remaining space for swap (about 2.5G if for 32G SD card).
And then
sudo mkfs.ext4 /dev/sda3; to format as ext4 and run
sudo fsck.ext4 /dev/sda1; sudo fsck.ext4 /dev/sda2; to check.
After booting into the berryboot SD card, add this in /etc/fstab
/dev/mmcblk0p3 /swap ext4 defaults,noatime 0 0
and then edit swap location to /swap/swap and mount the partition using
sudo mkdir -p /swap; sudo mount -t ext4 /dev/mmcblk0p3 /swap; and then setup dphys-swapfile using
sudo vi /etc/dphys-swapfile; to /swap/swap and run
sudo dphys-swapfile setup; sudo dphys-swapfile swapon;
- shell script Select all
# change password
passwd
# su
sudo su
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install vim zip unzip openssh-server git
#Login to Ubuntu-trusty, username and password are ubuntu and ubuntu respectively
# install clang and swift for Ubuntu-trusty only (but no swift package manager)
sudo apt-get install libicu-dev clang-3.6
sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-3.6 100
sudo update-alternatives --install /usr/bin/clang++ clang++ /usr/bin/clang++-3.6 100
#install swift-2.2_1%3a2.2-0ubuntu11~trusty1_armhf.deb (Ubuntu-trusty only) or just download from here without adding source repo
#https://mega.nz/#!fpYxzBgY!MLGiW8HAV6MllAD0gkzrSFlQ6TdubwBfFYGyezNVAXg
wget -qO- http://dev.iachieved.it/iachievedit.gpg.key | sudo apt-key add -
echo "deb [arch=armhf] http://iachievedit-repos.s3.amazonaws.com/ trusty main" | sudo tee --append /etc/apt/sources.list
sudo apt-get update
sudo apt-get install swift-2.2
swift --version
#test simple swift compile
cat > hello.swift <<EOF
let device = "Raspberry Pi 3!"
print("Hello from Swift on \(device)")
EOF
swiftc hello.swift
./hello
#Login to Rasbian, username and password are pi and raspberry respectively
#change password (recomended)
passwd
#Rasbian config to set locale and timezone
sudo raspi-config
# configure keyboard to US
sudo dpkg-reconfigure keyboard-configuration
#reload the keymap
sudo invoke-rc.d keyboard-setup start
#scan hidden SSID
sudo iwlist wlan0 scanning essid "Your Hidden SSID"
#vi ~/.bashrc and add
export LC_ALL="en_US.UTF-8"
#add export LS_COLORS=$LS_COLORS:'di=1;44:' ; # dir white on blue background
sudo locale-gen en_US.UTF-8
# generate locale for en_US.UTF-8
sudo dpkg-reconfigure locales
#command line reset timezone
sudo dpkg-reconfigure tzdata
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install vim openssh-server
# Forwarding X11 application using ssh
please refer to this guide https://kb.iu.edu/d/bdnt
# In Linux or Mac
ssh -Y pi@10.0.1.XX
# In Windows 10 WSL, and install XServer in Windows 10 such as xming
# export DISPLAY=:0 (for WSL x11-apps)
export DISPLAY=localhost:0.0
ssh -Y pi@10.0.1.XX
# After login Raspberry pi
sudo apt-get install idle3
idle &
# run scratch
sudo apt-get install scratch
scratch &
sudo apt install codeblocks
codeblocks &
# run browser
chromium-browser &
#support of HFS Plus format drives
sudo apt-get install hfsplus hfsutils hfsprogs gdisk
#setup RAID, please refer to this, please use usb hub (with power source) for external HD disks.
https://pchelp.ricmedia.com/build-raspberry-pi3-raid-nas-server/
#install nginx (lightweght webserver)
sudo apt-get install nginx
cd; ln -s /usr/share/nginx/html .
#check ip adress and use browser connect to test web server
hostname -I
ifconfig eth0
ifconfig wlan0 # for wireless lan
ip addr | grep -Po '(?!(inet 127.\d.\d.1))(inet \K(\d{1,3}\.){3}\d{1,3})'
# generation of ssh key to remote server
ssh-keygen -t rsa
# copy ssh key to Raspberry Pi
ssh-copy-id pi@raspberrypi_ip_address
#install php in nginx
#sudo apt-get install php5-fpm php-apc
#sudo apt-get install php-fpm php-apcu
sudo apt install php-fpm php-curl php-gd php-cli php7.3-opcache php-mbstring php-xml php-zip
# link the html folder to home
cd
#ln -s /usr/share/nginx/html .
ln -sf /var/www/html .
# create testing php page
cat > ~/html/info.php <<EOF
<?php
phpinfo();
?>
EOF
#add in /etc/php/7.3/fpm/pool.d/www.conf
user = pi
group = pi
# enable php in nginx
sudo vi /etc/nginx/sites-enabled/default
#see instructions for php7 here -> https://getgrav.org/blog/raspberrypi-nginx-php7-dev
#see instructions here https://www.raspberrypi.org/documentation/remote-access/web-server/nginx.md
sudo touch /var/run/php/php7.3-fpm.sock
#reload web server and test
#check to ensure the /var/run/php/php7.3-fpm.sock file exists
sudo service nginx restart
sudo service php7.3-fpm restart
#install samba as a file server
sudo apt-get install samba samba-common-bin
#edit /etc/samba/smb.conf and add the followings
# assume USB drive is mounted on /media/pi/USBDRIVE
#manual mount external drive
sudo mkdir -p /media/pi/USBDRIVE
sudo mount -o uid=pi,gid=pi,rw /dev/sda1 /media/pi/USBDRIVE
[public_USBDRIVE]
comment = Public USBDRIVE
browseable = yes
read only = no
force user = "pi"
guest ok = yes
public = yes
writable = yes
path = /media/pi/USBDRIVE
create mask = 0755
directory mask = 0755
# reload samba
# sudo service samba reload
sudo systemctl restart smbd
#install minidlna as a media server
sudo apt install minidlna
#edit /etc/minidlna.conf and add the followings
media_dir=V,/media/pi/PassportUltra/Video
friendly_name=My-Movie
#edit /etc/default/minidlna and add the followings
USER="root"
GROUP="root"
# reload minidlna
sudo service minidlna restart
sudo service minidlna force-reload
# see what network services are working on raspberry pi
sudo netstat -ntlp
＃install google app engine for development
wget --no-check-certificate https://storage.googleapis.com/appengine-sdks/featured/google_appengine_1.9.34.zip
unzip google_appengine_1.9.34.zip
export PATH=$HOME/google_appengine:$PATH
#test GAE web page from localhost web browser
dev_appserver.py ~/google_appengine/demos/python/guestbook
#test GAE web app from other machine
dev_appserver.py --host $(ip addr | grep -Po '(?!(inet 127.\d.\d.1))(inet \K(\d{1,3}\.){3}\d{1,3})') --port 8080 ~/google_appengine/demos/python/guestbook/
dev_appserver.py --host $(hostname -I) --port 8080 ~/google_appengine/demos/python/guestbook/
# download node-v6.9.4-linux-armv7l.tar.xz from https://nodejs.org/en/download/
wget --no-check-certificate https://nodejs.org/dist/v6.9.4/node-v6.9.4-linux-armv7l.tar.xz
# extract node-v6.9.4-linux-armv7l.tar.xz
cd $HOME
tar xJvf $HOME/Download/node-v6.9.4-linux-armv7l.tar.xz
# setup PATH
export PATH=$HOME/node-v6.9.4-linux-armv7l/bin:$PATH
# Compile and Install Visual Studio Code 1.9.1
sudo apt-get update
sudo apt-get install libx11-dev build-essential
cd $HOME
git clone https://github.com/microsoft/vscode
cd $HOME/vscode
git tag -l
#checkout 1.9.1
git checkout tags/1.9.1
./scripts/npm.sh install --arch=armhf
# run Visual Studio Code
./scripts/code.sh
# Visual Studio Code - Desktop Entry
sudo tee /usr/share/applications/code.desktop > /dev/null <<'EOF'
[Desktop Entry]
Name=Visual Studio Code
Comment=Code Editing. Redefined.
GenericName=Text Editor
Exec=/home/pi/vscode/scripts/code.sh %U
Icon=code
Type=Application
StartupNotify=true
StartupWMClass=Code
Categories=Utility;TextEditor;Development;IDE;
MimeType=text/plain;inode/directory;
Actions=new-window;
Keywords=vscode;
[Desktop Action new-window]
Name=New Window
Name[de]=Neues Fenster
Name[es]=Nueva ventana
Name[fr]=Nouvelle fenêtre
Name[it]=Nuova finestra
Name[ja]=新規ウインドウ
Name[ko]=새 창
Name[ru]=Новое окно
Name[zh_CN]=新建窗口
Name[zh_TW]=開新視窗
Exec=/home/pi/vscode/scripts/code.sh %U
Icon=code
EOF
# Manual download and install Visual Studio Extension
# please refer to how to get the download url as referenced from http://stackoverflow.com/questions/37071388/how-to-install-vscode-extensions-offline
wget --no-check-certificate https://ms-vscode.gallery.vsassets.io:443/_apis/public/gallery/publisher/ms-vscode/extension/cpptools/0.10.1/assetbyname/Microsoft.VisualStudio.Services.VSIXPackage
mv Microsoft.VisualStudio.Services.VSIXPackage ms-vscode-cpptools.vsix
# Then use "Install from VSIX" menu item in Visual Studio code Debug Setting
#install squid + unblock cn and assume node.js npm are installed as above
sudo apt-get install squid3 git
npm install Unblocker/Unblock-Youku
#install phantomjs for testing
git clone --depth 1 https://github.com/gautamMalu/PhantomJs-armhf.git
#optionally install casper tag 1.1.1, PhantomJs+Casper for web scraping
git clone --branch '1.1.1' --single-branch --depth 1 https://github.com/casperjs/casperjs.git
sudo apt-get install libfontconfig1 libjpeg8 libicu-dev
cd PhantomJs-armhf/bin; sudo mv phantomjs /usr/local/bin/
cd ~/node_modules/ub.uku.js/
npm install
npm test
#cp ~/node_modules/ub.uku.js/shared/urls.js ~/node_modules/ub.uku.js/youku.rules
#cat ~/node_modules/ub.uku.js/shared/urls.js | grep "^[ ']*http" | sed "s/^[ ']*/\^/;s/[,'][ ]*\/\/.*$//;s/\*'$//;s/\*',$//;s/',//;s/[*?]$//;s/\*/\.\*/g;s/\?/\\\?/g;" > ~/node_modules/ub.uku.js/youku.rules
vi ~/node_modules/ub.uku.js/youku.rules
curl -o ~/node_modules/ub.uku.js/youku.rules http://pac.uku.im/regex
sudo vi /etc/squid3/squid.conf
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
http_access allow localnet
# add acl rules
acl uyouku url_regex -i "/home/pi/node_modules/ub.uku.js/youku.rules"
never_direct allow uyouku
cache_peer 127.0.0.1 parent 8888 0 no-query default
cache_peer_access 127.0.0.1 allow uyouku
cache_peer_access 127.0.0.1 deny all
# enable cache_dir say 2048 (The default is 100 MB)
cache_dir ufs /var/spool/squid3 2048 16 256
# 2016/03/09 https://github.com/Unblocker/Unblock-Youku/issues/618
# dns_nameservers 158.69.209.100 45.32.72.192 45.63.69.42
#restart squid3
sudo service squid3 reload
#edit /home/pi/node_modules/ub.uku.js/server/server.js (near line 257) to change listening ip and port say 127.0.0.1 8888
# ubuku_server.listen('8888','127.0.0.1')...
# auto run unblockcn and use http://ipservice.163.com/isFromMainland to test
# sudo vi /etc/rc.local and add
su pi -c '/usr/bin/nodejs /home/pi/node_modules/ub.uku.js/server/server.js --nolog --proxy=https://secure.uku.im:993 --bak_proxy=http://proxy.uku.im:443 --pac_proxy=http://proxy.uku.im:443 > /dev/null &'
# test terminal run with external proxy
sudo node /home/pi/node_modules/ub.uku.js/server/server.js --proxy=https://secure.uku.im:993 --bak_proxy=http://proxy.uku.im:443 --pac_proxy=http://proxy.uku.im:443
#support Chinese font 文鼎 PL 上海宋 Un and input method
sudo apt-get install ttf-arphic-uming scim-tables-zh im-switch
#support Chinese font 文泉驛微米黑體、文泉驛正黑體、文泉驛點陣宋體
sudo apt-get install ttf-wqy-microhei ttf-wqy-zenhei xfonts-wqy
#ext4 TRIM command support using the discard mount option in fstab (or with tune2fs -o discard /dev/sdaX).
sudo tune2fs -o discard /dev/sdb1
#install bitcoind
#sudo apt-get install bitcoind # bitcoind deb package in Debian is obsolete and needs upgrade
#build from source as below or download the precompiled version from here and use sudo dpkg -i to install https://mega.nz/#!KtJWTZ7A!RN4IOGtvflSc0lXuJB1__lYTkdYvsnoegk_JJ0JGtA8
#Build requirements
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git
sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libminiupnpc-dev libminiupnpc-dev libzmq3-dev libcrypto++9 minissdpd
git clone -b 0.12 --depth 1 https://github.com/bitcoin/bitcoin.git
#see here to build bitcoind with Berkeley DB script https://github.com/bitcoin/bitcoin/blob/master/doc/build-unix.md
cd bitcoin
mkdir -p db4
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix/
BDB_PREFIX=$(cd $(dirname "../../db4") && pwd -P)/$(basename "../../db4"); ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
make install
cd ../..
./autogen.sh
BDB_PREFIX="$(pwd)/db4"; ./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" CXXFLAGS="--param ggc-min-expand=1 --param ggc-min-heapsize=32768" --without-gui --with-miniupnpc --enable-upnp-default --disable-tests
#Rasbian config to set boot option to CLI mode
sudo raspi-config
#compiling bitcoind is cpu-intensive and memory-hungry, better to reboot to CLI mode and kill unnecessary services then
make -j2
sudo make install
#setup bitcoind and let it create bitcoin.conf
bitcoind -daemon
bitcoin-cli stop
# To enable TRIM, put discard option in fstab like this
PARTUUID=6c887fff-01 /media/pi/SSDDRIVE ext4 defaults,discard 0 0
#create data directory in USB SSD drive
mkdir -p /media/pi/SSDDRIVE/bitcoin
cp ~/.bitcoin/bitcoin.conf /media/pi/SSDDRIVE/bitcoin/
cp ~/wallet.dat /media/pi/SSDDRIVE/bitcoin/ # if have old bitcoin wallet.dat
#start bitcoind as daemon in SSD Drive
bitcoind -datadir=/media/pi/SSDDRIVE/bitcoin -daemon
bitcoind --help
#while bitcoind is running as daemon, get new address and check other status
# bitcoin-cli help
bitcoin-cli getinfo
bitcoin-cli listaccounts
bitcoin-cli getnewaddress "worker1" # check tx history say https://blockchain.info/address/14uUbzJSi2t5MGgYH72PdTonD22V8drBVN
bitcoin-cli getaccountaddress "worker1"
bitcoin-cli getbalance
#daemon will download the entire block chain data and can take over several days and total size > 60G
bitcoin-cli getblockcount # the current blockcount should be over 1M https://blockchain.info/latestblock
bitcoin-cli getconnectioncount
#install cpuminer
sudo apt-get install libcurl4-openssl-dev git make
git clone --depth 1 git://github.com/pooler/cpuminer.git
cd cpuminer
./autogen.sh
./configure CFLAGS="-O3"
make
sudo make install
minerd --help
minerd --url http://api.bitcoin.cz:8332 -a sha256d --userpass=yourid.worker1:pass1
#cgminer (but not working in Raspberry Pi 3
#OpenCL...............: Detection overrided. GPU mining support DISABLED
git clone -b 3.7 https://github.com/ckolivas/cgminer.git
cd cgminer
./autogen.sh
./configure --enable-opencl --enable-scrypt
# configure failed due to absence of GPU and opencl in Raspberry Pi 3
#Build QuantLib 1.7.1
#libquantlib0-dev 1.4.2 is available in package repo
#QuantLib 1.7.1
#or download the updated package from here https://mega.nz/#!PkYWBDLC!dC8klXxcouc1RrNQ2Bct_tSweaO6A3UwTNkGeXvGldo
#Download QuantLib source and extract
wget http://jaist.dl.sourceforge.net/project/quantlib/QuantLib/1.7.1/QuantLib-1.7.1.tar.gz
tar -xzvf QuantLib-1.7.1.tar.gz
#Build requirement
sudo apt-get install build-essential libtool libboost-all-dev
cd QuantLib-1.7.1
./configure CXXFLAGS="--param ggc-min-expand=1 --param ggc-min-heapsize=32768" --disable-shared
#Rasbian config to set boot option to CLI mode
sudo raspi-config
#compiling QuantLib is cpu-intensive and memory-hungry, better to reboot to CLI mode and kill unnecessary services then
make -j2 # or just make if failed
sudo make install
#test compile QuantLib example
cd ~/QuantLib-1.7.1/Examples/Bonds
g++ Bonds.cpp -o bin/Bonds -lQuantLib
# run example Bonds
./bin/Bonds
#compiling litecoind is similar to bitcoind but it would conflict with bitcoind
git clone --depth 1 https://github.com/litecoin-project/litecoin.git
#build from source or download the precompiled version from here https://mega.nz/#!Ptwl0KZD!XVyO7DHugtoK2iEib2nj2jdyMRSkadlIMa1oPp3QSak
#setup litecoind in raspberry pi
litecoind
#create data directory in USB SSD drive
mkdir -p /media/pi/SSDDRIVE/litecoin
cp ~/.litecoin/litecoin.conf /media/pi/SSDDRIVE/litecoin/
#start litecoind as daemon in SSD Drive
litecoind -datadir=/media/pi/SSDDRIVE/litecoin -daemon
litecoind --help
#reindex litecoin database if corrupted
litecoind -reindex -datadir=/media/pi/SSDDRIVE/litecoin
#while litecoind is running as daemon, get new address and check other status
# litecoin-cli help
litecoin-cli getinfo
litecoin-cli listaccounts
litecoin-cli getnewaddress "worker2" # check tx history say https://block-explorer.com/address/LRwz2mJpoMz2FPkqE7hxKvcLnUyUHESW4Q
litecoin-cli getaccountaddress "worker2"
litecoin-cli getbalance
litecoin-cli getblockcount # the current blockcount should be over 900000 see http://explorer.litecoin.net/
#setup local repo
sudo apt-get install dpkg-dev
sudo mkdir -p /usr/local/mydebs
sudo cp -s /var/cache/apt/archives/*.deb /usr/local/mydebs/
cd /usr/local/mydebs
sudo sh -c 'dpkg-scanpackages . /dev/null | gzip -9c > Packages.gz'
echo "deb file:/usr/local/mydebs ./" | sudo tee --append /etc/apt/sources.list
sudo apt-get update
#setup swapfile in Rasbian
sudo vi /etc/dphys-swapfile
#edit the swapfile location and size (suggest min 2048) then save the file
#for berryboot the swapfile should be in external USB drive
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
#check memory and swap
free -h
#turn off swap
sudo dphys-swapfile swapoff
#configure and make again for the projects
#shutdown the machine
sudo halt
#restart the machine
sudo reboot
Swift 2.2 for Linux package requires clang-3.6 and Ubuntu-trusty for Pi
This image https://wiki.ubuntu.com/ARM/RaspberryPi (2015-04-06-ubuntu-trusty.img) is for Raspberry Pi 2 and does not work on Raspberry Pi 3, the FAT32 partition content in the layout folder and the start*.elf, bcm2710-rpi-3-b.dtb should be upgraded/added for the new hardware for booting.
config.txt add these settings
disable_overscan=1
start=1
gpu_mem=64
max_usb_current=1
initramfs initrd7.img
kernel=kernel7.img
It is possible to install the Swift 2.2 in Rasbian other than Ubuntu-trusty for Pi
1. Install clang-3.7 and libicu-dev in Rasbian
sudo apt-get install libicu-dev clang-3.7
sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-3.7 100
sudo update-alternatives --install /usr/bin/clang++ clang++ /usr/bin/clang++-3.7 100
2. download the package from here without adding source repo
#https://mega.nz/#!fpYxzBgY!MLGiW8HAV6MllAD0gkzrSFlQ6TdubwBfFYGyezNVAXg
3. download a fake clang-3.6 package that install nothing but to meet dependency as a hack
https://mega.nz/#!voZ0yA6T!10lqNIhEKLfNpptmy-rlsEdRn15gIl14Fd0ibjmI_x8
4. install these deb files together
sudo dkpg -i clang-3.6-fake.deb swift-2.2_1%3a2.2-0ubuntu11~trusty1_armhf.deb
Swift 2.2 for Linux without Swift Package Manager. Here are the alternative ways:
- shell script Select all
#Method 1 : compile everything on build
cd ${HOME}
mkdir -p SwiftProjects
cd ${HOME}/SwiftProjects
# get dependency package
git clone --depth 1 https://github.com/erica/SwiftString.git
git clone --depth 1 https://github.com/haginile/SwiftDate.git
#fix some errors in SwiftDate/SwiftDate/DateHelpers.swift and SwiftDate/SwiftDate/Term.swift simlar to previous post "What you need for Swift on Linux"
vi SwiftDate/SwiftDate/DateHelpers.swift
extension String {
/* comment out these 2 func
subscript (i: Int) -> String {
return String(Array(self.characters)[i])
}
subscript (r: Range<int>) -> String {
get {
let subStart = self.startIndex.advancedBy(r.startIndex, limit: self.endIndex)
let subEnd = subStart.advancedBy(r.endIndex - r.startIndex, limit: self.endIndex)
return self.substringWithRange(Range(start: subStart, end: subEnd))
}
}
*/
vi +195 SwiftDate/SwiftDate/Term.swift
#change from
switch timeUnit {
#to
switch timeUnit! { // unwrapped optional
cd ${HOME}/SwiftProjects
mkdir -p Sources/Test1
cat > Sources/Test1/main.swift <<EOF
#if os(Linux)
import Glibc
import Foundation
#endif
//import SwiftString
//import SwiftDate
import XCTest
class SwiftDateTesting: XCTestCase {
var allTests : [(String, () -> Void)] {
return [
("testCalendar", testCalendar),
("testDayCounter", testDayCounter),
]
}
func testCalendar() {
var cal = USSettlementCalendar()
XCTAssert(cal.isBizDay(Date(string: "2014-05-15")) == true, "Pass")
XCTAssert(cal.isBizDay(Date(string: "2014-05-17")) == false, "Pass")
XCTAssertEqual(cal.nextBizDay(Date(string: "2014-05-16")).serialNumber, Date(string: "2014-05-19").serialNumber, "Pass")
XCTAssertEqual(cal.bizDaysBetween(Date(string: "2014-05-15"), toDate: Date(string : "2014-05-20")), 3, "Pass")
}
func testDayCounter() {
var start_date = Date(string: "2000-01-15")
var end_date = Date(string: "2000-05-31")
var actual_365 = Actual365Fixed()
XCTAssertEqual(actual_365.dayCountFraction(start_date, date2: end_date), 137.0 / 365, "Pass")
var nl_365 = NL365()
XCTAssertEqual(nl_365.dayCountFraction(start_date, date2: end_date), 136.0 / 365, "Pass")
var act_360 = Actual360()
XCTAssertEqual(act_360.dayCountFraction(start_date, date2: end_date), 137.0 / 360.0, "Pass")
var thirty_360 = Thirty360()
XCTAssertEqual(thirty_360.dayCountFraction(start_date, date2: end_date), 136.0 / 360.0, "Pass")
var thirty_360e = Thirty360(convention: Thirty360.Convention.EurobondBasis)
}
}
XCTMain([SwiftDateTesting()])
EOF
cd Sources/Test1
swiftc -emit-executable ../../SwiftString/Sources/*.swift ../../SwiftDate/SwiftDate/*.swift main.swift -o test1
./test1
#Method 2 : dynamic library link
#build module and library for dynamic linking
cd ${HOME}/SwiftProjects
mkdir -p Sources/Test2
cat > Sources/Test2/main.swift <<EOF
#if os(Linux)
import Glibc
import Foundation
#endif
import SwiftDateString
let start_date = Date(string: "2000-01-15")
var end_date = Date(string: "2000-05-31")
var actual_365 = Actual365Fixed()
print(actual_365.dayCountFraction(start_date, date2: end_date))
EOF
cd Sources/Test2
#build module and dynamic library
swiftc -emit-library ../../SwiftString/Sources/*.swift ../../SwiftDate/SwiftDate/*.swift -module-name SwiftDateString -emit-module-path SwiftDateString.swiftmodule -module-name SwiftDateString -module-link-name SwiftDateString
#compile and link with dynamic library at current directory
swiftc -emit-executable main.swift -o test2 -I. -L. -Xlinker -rpath -Xlinker "." -lSwiftDateString
./test2
#alternative way is to copy the shared library to /usr/lib then link
sudo cp libSwiftDateString.so /usr/lib/
swiftc -emit-executable -I. -lSwiftDateString main.swift -o test2a
./test2a
#Method 3: static library link
#build module and static library for linking
cd ${HOME}/SwiftProjects
mkdir -p Sources/Test3
cat > Sources/Test3/main.swift <<EOF
#if os(Linux)
import Glibc
import Foundation
#endif
import SwiftDateString
public func timetest(block: () -> Void) {
let date = NSDate()
block()
let timeInterval = NSDate().timeIntervalSinceDate(date)
print("Elasped time: \(timeInterval)")
}
public func testit() {
let start_date = Date(string: "2000-01-15")
let end_date = Date(string: "2000-05-31")
let actual_365 = Actual365Fixed()
print("Function: \(__FUNCTION__), File: \(__FILE__)")
print("2000-01-15 to 2000-05-31 dayCountFraction is ", terminator:"")
print(actual_365.dayCountFraction(start_date, date2: end_date))
}
timetest(testit)
EOF
#compile
cd Sources/Test3
swiftc -module-name SwiftDateString -c ../../SwiftString/Sources/*.swift ../../SwiftDate/SwiftDate/*.swift -emit-module-path SwiftDateString.swiftmodule -module-link-name SwiftDateString
PROJECT_PREFIX=$(cd $(dirname "../../") && pwd -P)/$(basename "../../"); mkdir -p obj; cd obj; swiftc -parse-as-library -module-name SwiftDateString -emit-object ${PROJECT_PREFIX}/SwiftString/Sources/*.swift ${PROJECT_PREFIX}/SwiftDate/SwiftDate/*.swift; cd ..
#build static library
ar -rcs libSwiftDateString.a obj/*.o
#link with static library
swiftc -emit-executable main.swift -o test3 -I. -L. -Xlinker libSwiftDateString.a
#Method 4: Use makefile for static library link
#makefile to build module and static library for linking
cd ${HOME}/SwiftProjects
mkdir -p Sources/tidyjson
cd Sources/tidyjson
git clone --depth 1 https://github.com/benloong/TidyJSON.git
# edit TidyJSON/Sources/TidyJSON.swift
#find dataUsingEncoding
#//if let data = string.dataUsingEncoding(NSUTF8StringEncoding) {
#and change it to
if let data = NSString(string:string).dataUsingEncoding(NSUTF8StringEncoding) {
# edit TidyJSON/Tests/Test.swift
#add
#if os(Linux)
import Glibc
#endif
# find all lines with
# var allTests : [(String, () throws -> ())] {
# and change them to
var allTests : [(String, () -> Void)] {
# find all lines with let content = try String(contentsOfFile: "./Tests/TestCases/\(path).json", encoding: NSUTF8StringEncoding)
# and change them to block code as below
if let content = try? NSString(contentsOfFile: "./TidyJSON/Tests/TestCases/\(path).json", encoding: NSUTF8StringEncoding).bridge()
{
// no change here
if let _ = try? JSON.parse(content) {
... //(no change here)
}
else {
... //(no change here)
}
}
#create this Makefile
cat <<'EOF' > Makefile
APP=tidyjsonTest
PROJECT_PREFIX=$(PWD)
MODULENAME=TidyJSON
OBJ_DIR=obj
DEP_LIB_SRC_FOLDER1 = TidyJSON/Sources
SWIFT_FILES = $(wildcard $(PROJECT_PREFIX)/$(DEP_LIB_SRC_FOLDER1)/*.swift)
OBJ_FILES=$(addprefix, ./obj/, $(notdir $(SWIFT_FILES:.swift=.o)))
testfile= $(PROJECT_PREFIX)/TidyJSON/Tests/Test.swift
mainfile=$(PROJECT_PREFIX)/TidyJSON/Tests/main.swift
all: $(APP)
$(APP): $(testfile) $(mainfile) lib$(MODULENAME).a $(MODULENAME).swiftmodule ; \
swiftc -emit-executable $(testfile) $(mainfile) -o $(APP) -I. -L. -Xlinker lib$(MODULENAME).a ;
lib$(MODULENAME).a: $(SWIFT_FILES) ; \
$(shell mkdir -p $(OBJ_DIR); cd $(OBJ_DIR); swiftc -parse-as-library -module-name $(MODULENAME) -emit-object $(SWIFT_FILES)) \
rm -f lib$(MODULENAME).* ; \
ar -rcs lib$(MODULENAME).a $(OBJ_DIR)/*.o ;
$(MODULENAME).swiftmodule: $(SWIFT_FILES) ; \
rm -f $(MODULENAME).swiftmodule $(MODULENAME).swiftdoc ; \
swiftc -emit-module -module-name $(MODULENAME) -c $(SWIFT_FILES) -emit-module-path $(MODULENAME).swiftmodule -module-link-name $(MODULENAME) ;
clean: ; rm -rf obj $(MODULENAME).swift* lib$(MODULENAME).* $(APP)
.PHONY: all clean
EOF
# make then run to test
make
./tidyjsonTest
To install docker, see this http://blog.hypriot.com/post/run-docker-rpi3-with-wifi/
The latest Kali Linux image for pentesting is here https://www.offensive-security.com/kali-linux-arm-images/
Swift 3.0 is out for Ubuntu 16 (Xenial Xerus)
see Raspberry Pi image for Ubuntu 16 here https://wiki.ubuntu.com/ARM/RaspberryPi
- installation shell script Select all
cd $HOME
wget http://swift-arm.ddns.net/job/Swift-3.0-Pi3-ARM-Incremental/lastSuccessfulBuild/artifact/swift-3.0.tgz
mkdir $HOME/swift-3.0
cd $HOME/swift-3.0 && tar -xzf ../swift-3.0.tgz
export PATH=$HOME/swift-3.0/usr/bin:$PATH
sudo apt-get update
sudo apt-get install -y libicu-dev clang-3.6
sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-3.6 100
sudo update-alternatives --install /usr/bin/clang++ clang++ /usr/bin/clang++-3.6 100
mkdir $HOME/hello; cd $HOME/hello
swift package init --type executable
swift build
.build/debug/hello
